Manual

OPERATION
95
PROG
01 ~ 16
3. Select a STEP in the selected program.
STEP
01 ~ 16
4. Select Memory and select which memory
location to load for the selected step.
 Settings loaded from the memory location will
be used for the selected step.
 The same memory location can be used for
multiple steps.
Memory
M001 ~ M256
5. Set the Run setting for the step.
 By default RUN is set to Skip.
 The Auto setting will automatically start and go
onto the next step.
 The Manual setting will wait for the user to
press Next[F2] before running the step.
Run
Skip, Auto, Manual
6. Choose the On-Time in seconds.
 The on-time setting determines how long the
load is turned on for the selected step.
 The on-time is defined as the total test time
minus the off-time.
On-Time
0.1 ~ 60 seconds
7. Choose the Off-Time in seconds.
 The off-time setting determines how long the
load is turned off between the end of the current
step and the start of the next step.
 The off-time is defined as the total test time
minus the on-time.
Off-Time
Off, 0.1 ~ 60 seconds