Manual

EXTERNAL CONTROL
157
Turning the Load On
Description
Operating the PEL-3000 Series in parallel mode
is the same as for single units.
Note
When using the units in parallel, the load line
inductance could be increased or the stability of
the units could be reduced. It may be necessary to
reduce the response speed setting to increase
stability.
1. Turn the slave and master units on.
2. Set the operation mode and settings on the
master unit.
 The master’s settings will be used by the slave
units.
3. Turn the load on from the Master unit.
 All measurements will be displayed and
updated on the Master unit only.