Manual

EXTERNAL CONTROL
135
External Voltage Control - Overview
Background
External voltage control of the CC, CR, CV and
CP mode is accomplished using the J1
connector on the rear panel. An input voltage of
0~10V corresponds to 0% ~ 100% of the rated
current (CC mode), rated voltage (CV mode), or
rated power (CP mode). For CR mode, 0V ~
10V corresponds to the maximum resistance ~
minimum resistance.
Connection
When connecting the external voltage source to
the J1 connector, use a ferrite core and use
twisted pair wiring.
PEL-3000EXT-V
J1
connector
＋
－
3
1
Input
Terminals
Ferrite Core and
twisted wiring
 Pin1 → EXT-V (+)
 Pin3 → EXT-V (-)
Note
The input impedance for external voltage control is
10kΩ.
Use a stable voltage supply for the external voltage
control.