Manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
OPERATION
63
Zoom
Background
The Zoom menu can be accessed from the
Horizontal menu.
Setup
1. Press the
Horizontal key to access the
Horizontal menu.
2. Press Zoom to set the scope to Zoom window
mode.
Horizontal menu
Horizontal icon
Zoom scale
Zoom position
3. From the Zoom horizontal menu the zoom scale
and zoom position can be configured.