Manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
GDS-200 & GDS-300 Series User Manual
46
Select the Trigger Source and the Trigger Level
Background
The touch screen can be used to conveniently select
the trigger source as well as set the trigger level.
Select Trigger
Source
Tap on the trigger level indicator to toggle between
trigger sources.
Toggle trigger
source
Set the Trigger
Level
Swipe the screen to the right of the grid to set the
trigger level with the currently selected source.
The trigger level will also be shown in a popup
window.
Example
Trigger
Level