Manual
Table Of Contents
- SAFETY INSTRUCTIONS
- GETTING STARTED
- OPERATION
- REMOTE CONTROL CONFIG
- FAQ
- I connected the signal but it does not appear on the display.
- I want to remove the measurement or FFT results from the display.
- The waveform does not update (frozen).
- The probe waveform is distorted.
- Autoset does not catch the signal well.
- The date and time settings are not correct.
- The accuracy does not match the specification.
- APPENDIX
- INDEX
GDS-200 & GDS-300 Series User Manual
184
AC Voltage
Range
50mV, 500mV, 5V, 50V, 700V 5 ranges
Accuracy
50mV, 500mV, 5V, 50V, 700V ±(1.5% + 15 digits) at 50Hz-
1kHz
AC Current*
Range
50mA, 500mA, 10A 3 ranges
Accuracy
50mA, 500mA, ±(1.5% + 15 digits) at 50Hz-1kHz
10A ±(3% + 15 digits) at 50Hz-1kHz
* Measure range: >10mA
Resistance*
Range
500Ω, 5kΩ, 50kΩ, 500kΩ, 5MΩ, 5 range
Accuracy
500Ω, 5kΩ, 50kΩ, 500kΩ ±(0.3% + 3 digits)
5MΩ ±(0.5% + 5 digits)
* Measure range: 50Ω to 5MΩ
Diode Test
Maximum forward voltage 1.5V, Open voltage 2.8V
Temperature (Thermocouple)*
Range
-50°C - + 1000°C
Resolution
0.1°C
Thermocouple
B, E, J, K, N, R, S, T
* Specifications do not include probe accuracy. Temperature specifications
only apply to the GDS-307/310/320.
Continuity Beeper
< 15 Ω
Continuity Beeper
Functions
Auto Range, Max, Min, Hold, Trend plot