User Manual

11
② Mode key (MODE) :
CCT MODE : [Knob1] Adjust INT, [Knob2] Adjust CCT,
[Knob3] Adjust G/M
GEL MODE (GEL) : Rotate and short press [Select ] key to
select GEL mode, select 3200K or 5600K color temperature
(CCT), and select the corresponding color paper of Rosco
or LEE brand to output the desired light.
RGB MODE : [Knob 1] Adjust overall INT, Press [Knob 1]
Button, Switch to RGB adjustment, [Knob 1] Adjust the
brightness of the red light, [Knob2] Adjust the brightness
of the green light, [Knob 2] Adjust the brightness of blue
light.
Source MODE (Source) : Rotate and short press [Select]
key to select Source mode, choose the desired light source
effect
EFFECT MODE (EFFECT) : Rotate and short press [Select]
key to select FX mode, A variety of light effects are
available: Lightning, CCT Loop, candle, Bad bulb, TV,
Paparazzi, Explosion, Pulsing, Disco, Cop Car, Hue Loop.
Press the [MODE] button to enter the mode selection main
page → rotate [Knob 1] to select the mode → press [Knob
1] to enter the corresponding mode interface →Set the
parameter of the project by pressing or rotating [Knob 1]
→ press [BACK] Back to previous
HSI MODE : [Knob 1] Adjust INT, [Knob 2] Adjust HUE,
[Knob 3] Adjust SAT
CCT HSI RGB
GEL Source Effect
CCT
INT
10.5%
CCT
6800K
G/M
0
HSI
INT
10.0%
HUE
SAT
0
100%
°
RGB
INT
11.2%
G
10
R
84
B
10
Effect
INT
18.1%
CCT
10000K
SPD
1
Lightning
INT
10.0%
GEL
INT
100.0%
3200K 5600K
R L
L002 Rose Pink
L007 Pale Yellow
L019 Fire
L021 Gold Amber
L025 Sunset Red
L026 Bright Red
Source
Tungsten