User manual

1 2 3 4
Connect the lamp and adapter, plug in the power line or insert the
battery, a n d s w i t c h o n t h e p o w e r s u p p l y.
5
5
1
2
3
5
6
4
7
8
Power Switch
6 7 8 9
GVM-MX150D
160.00 mm
120.00 mm
Button of mode select
Mode/ WIFI button
Power port
V-buckled battery / buckle plate
connector of battery
Knob of brightness
control
Power switch
DMX port
Knob of fixing lamp holder
Knob of color
temperature control
Aluminum-alloy shell
Mounting point of lamp holder
Softboard
Folding
Anger fixing
knob
U-type holder
Connecting light
and power supply
Insert V buckle battery
1
2
3
5
6
4
7 8
Mode key/ WIFI reset key: mode is divided into Master mode and Slaver
mode; the key is for resetting the username and password of WIFI.
CH +/- key: to change channels (0~11)
LCD display: able to display the data, such as brightness, color
temperature and channel value, etc.
Brightness indicator: It will be lightened when adjusting the brightness
knob.
Color temp. indicator: it will be lightened when adjusting the color
temperature knob.
DMX console port
DMX console port
C O N T E N T S
Product introduction Page 1-------------------------------------------
Product parameter Page 2---------------------------------------------
Product structure analysis Page 3------------------------------------
Installation method Page 4~7-----------------------------------------
Description of product control keys Page 8-----------------------
Function introduction and instruction for use Page 9-----------
APP control and APP on-line control Page 10~11----------------
Precautions Page 11------------------------------------------------------
Simple faults and troubleshooting Page 12-----------------------
Disclaimers Page 13------------------------------------------------------
Use and preservation Page 13----------------------------------------
Packing list Page 14------------------------------------------------------
14
Welcome to use GVM-MX150D. This product is designed specially for
senior photographers and can be applied to many occasions, such as live
video, outdoor photography, studio photography and video shooting on
YouTube as well. The characteristics of this product are:
PRODUCT
INTRODUCTION
PRODUCT
PARAMETER
It features stepless double color temperature and the range of color is
3200k~5600k with 2448 LED bulbs, which contributes to the recovery and
abundance of colors, so as to provide natural and vivid shooting effect.
It is equipped with intelligent control system via APP, able to control via
intelligent mobile device.
It is equipped with LCD and stable system, able to rotate through 360
and with four-vane bafe, which can effectively control the light to avoid
unexpected light, allowing the user to shoot with expected effect.
We believe that using the product properly is of great help to your shooting
practice. Therefore, we strongly suggest reading the following User Guide
before using the product.
Brand: GVM
Product Name: Photoood lamp
Product Model: GVM-MX150D
Product Type: Photographic flash LED
CRI: ≥97
LED QTY: 2448
Net weight: 6.1KG
Size (mm): 575*385*120mm
Heat dissipation: Natural
Material: Aluminum alloy
Production Place: Huizhou. China
Function/ Characteristic: APP, joint control, DMX console port, LED with
high color rendering index (CRI)
Color Temp: 3200k----5600k
Brightness degree: 56000lux/0.5m, 21000lux/1m
Light Adjusting mode: Stepless
Power: 150W
Volt: AC: 100-240V
Power Supply Mode: AC input &battery
Capacity of Battery: battery is not provided
Power supply: Built-in power supply
PRODUCT
STRUCTURE ANALYSIS
LCD display screen
1
Turn the button in clockwise direction to install and fix the lamp on the
holder and turn the button in counter-clockwise direction to disconnect
the lamp and holder.
INSTALLATION
METHOD
2
Insert the softboard into the light panel from top to bottom.
Loosen the adjusting knobs at sides of U-type holder and adjust the
angle of panel as expected, then tighten the adjusting knobs at sides
of U-type holder.
3
Align the screws on the folding with the screw holes on the lamp rst,
then insert and tighten the screws.
4
Set host mode for the photography light ( automatically as host mode when
switch on the machine ), open “GVM Easily APP on the mobile phone
( meanwhile turn on WIFI on the phone ), in the main menu in the APP----switch
the devices---select single and double photography light,then in the
main menu in APP-----set----select switch WIFI, and connect photography
light ( WIFI initial username: GVM_LED, password: gvm_admin ), once it shows
successfully connected GVM_LED”, return back to the main interface,
after it shows double color temperature LED light ( successfully connected )
in the main interface, it is allowed to control the lightness, color temperature,
channel value or switch on and off through the control key in APP, and also
the slave machines.
WIFI username and password resetting
It is able to reset the WIFI username and password if long press the WIFI reset
button for over 5 seconds. After resetting, the username and the password will
return to the initial ( WIFI username: GVM_LED, WIFI password: gvm_admin ).
Phenomenon
check if the mode were set as slave
mode, lightness and color temperature
of the products cannot be controlled
in slave mode
check if the product is switch off
because of the APP of mobile phone.
make sure the adapter
is well contacted with
the power plug
charge the battery
before using it
p r e s s t h e m o d e
button for once, switch
the mode from slave
mode to host mode
press the “ON/OFF
button once again
10
1.
11
APP CONTROL AND
APP ON-LINE CONTROL
PRECAUTIONS
Please use the matching power adapter or lithium battery with the same
specication to power the product. Do not use power adapter with
different output voltage parameters.
The product is not waterproof, please use it in rainproof environment.
The product is not anti-corrosion, therefore do not let the product touch
any corrosive liquid.
When using the product, make sure the product is put firmly and prevent
from falling and damage.
If the product will not be used for a long time, please switch off the power
to reduce energy loss.
SIMPIE FAULTS
AND TROUBLESHOOTING
Check the product
Troubleshooting
the switch
indicator does
not light up
the knob of
lightness and
color temperature
are out of control
the screen and
the light are off
when the
product is in
the state of
power-on
check the matching power adapter
indicator light up or not.
when using lithium battery, make
sure ther es no low powe r
protection.
DISCLAIMERS
Before using this product, please read the instructions carefully and make sure
use the product correctly. If you dont obey the instructions and warnings, you
maybe cause harm to yourself and the people around, or even damage the
product and other things around.
2. Once you use this product, you are deemed to have read the disclaimer and warning
carefully, understand and acknowledge all the terms and contents of this statement,
and promise to take full responsibility for the use of this product and possible
consequences.
USE AND
PRESERVATION
12 13
main menu
DESCRIPTION OF
PRODUCT CONTROL KEYS
N a m e
Host machine
Q u a n t i t y N o te s
1
Power line
1
1
Instructions
1
1
PACKING
LIST
Folding
Softboard
Mode selection
There are two kinds of more which are host mode and slave mode, switching
through mode button (automatically as host mode when switch on the
machine). In host mode, it is able adjust lightness, color temperature and
channel value, and it is also able to connect APP, and control the parameters
through APP. While in the slave mode, it is only able to set channel value,
rather than lightness and color temperature.
FUNCTION INSTRUCTION &
INSTRUCTION FOR USE
Channel adjustment
Set channel value using channel addition and subtraction key, ranging
from 0 to 11.
Brightness adjustment
In the host mode, adjust lightness through the knob or APP, ranging from
10% to 99%.
Color temperature adjustment
In the host mode, adjust color temperature through the knob or APP, ranging
from 3200K to 5600K.
On-line control (between photography lights)
Prepare two or more photography lights, set on as host mode and the other
slave mode, and set a same channel value, in this way, it is able to control
the lightness and color temperature of slave machine through adjusting the
knob of the host machine. Moreover, it is also able to connect the host
machine and APP, and then use the APP the control the slave machines.
Web: www.gvmled.com
FacebookGVM Ofcial
website
Download APP
IOS
Download APP
Android
Do not put the product in highly humid, strong electromagnetic field, direct sunlight,
high temperature environment. If not use the product for a long time, disconnect the
power and take out the battery.
CleanBefore clean, disconnect the power plug. And use wet cloth rather than any
detergent or soluble liquid, avoiding of damaging the surface layer.
USE AND
PRESERVATION
PowerMake sure the power is in the demanded range, not too high or too low. Correctly
load the battery, in order not the damage to machine.
RepairingIf there is fault or performance degradation, do not unpack the shell by
yourself, avoiding damage the machine and lose the right of maintenance. When there
is fault, do not hesitate to contact us, and we will do our best to deal the problem.
AccessoriesPlease use the accessories provided by manufacturer and approved
ones, in order to maximize the performance.
GuaranteeDo not modify the product, or you will lose the right of maintenance.
Clean
Power
Repairing
Accessories
Guarantee

Summary of content (1 pages)