WWW.GVISION-USA.COM VW-CG USER’S MANUAL VIDEO WALL CONTROLLER GVISION USA, INC 20532 Crescent Bay Dr. #104, Lake Forest CA 92630 / 949.586.3338 / info@gvision-usa.
WWW.GVISION-USA.COM Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET.
WWW.GVISION-USA.COM Safety Precautions / Maintenance Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
WWW.GVISION-USA.COM Table of Contents 1. Introduction…………..……………………………………………...........................................................................5 2. Login………………………………………………………………………………………………………………………..5 3. System……………………………………………………………………………………………………………………...6 3.1 Basic………………………………………………………………………………………………………………..6 3.2 Time…………………………………………………………………………………………………………………7 3.3 Serial………………………………………………………………………………………………………………..8 3.3.1 Serial Port Parameter…………………………………………………………………………………..8 3.3.
WWW.GVISION-USA.COM 1 Introduction This product is a high-performance video image processing workstation that can display multiple dynamic screens on multiple displays to realize the window splicing function. This product, designed specifically for high-quality multi-screen scenarios, features flexible control of different types of screens with varied resolutions.
WWW.GVISION-USA.COM 2) Log in with the correct username and password. 3 System Set system settings include Basic information, Time, Serial, Play, Window, Running Mode and Security. 3.1 Basic The Basic page lists the basic information including device type, serial number, software version, hardware version and boot version. 1) Click System > Basic. 20532 Crescent Bay Dr. #104, Lake Forest CA 92630 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.
WWW.GVISION-USA.COM 2) Click Refresh. 3.2 Time Set system time for your device and how to update time. 1) Click System > Time 20532 Crescent Bay Dr. #104, Lake Forest CA 92630 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.
WWW.GVISION-USA.COM 2) Set the parameters. Some are described in the table below. Parameter Time Zone Description Choose a time zone for your device. Current system time of the device. System Time Auto Update Click the Set Time text box and then set the time manually or select Sync with PC and then the device automatically synchronizes time with your computer. Enable this function if you have a Network Time Protocol (NTP) server on the network.
WWW.GVISION-USA.COM 3) Some parameters are described in the table below. Parameter Description Serial Port Parameters Select the serial port to set, including RS232 and RS485. NO. Select the serial port to set. Port Usage Screen Controll. Duplex Mode Baud Rate Full duplex or half duplex. Available when RS485 is selected. Transmission rate in bps. The baud rate must be consistent with that on the connected external device. Data Bit Number of data bits per character.
WWW.GVISION-USA.COM Note! In server mode, only Duplex can be configured on the Web browser, and all the other parameters can be configured only on the central server. 3.3.2 Screen Control Protocol Select or customize a screen control protocol as required. 3.4 Play 3.4.1 Play Set display mode. 3) Click System > Play. 4) The Play page lists the display mode. 3) Click Save. 3.4.2 Advanced Set what to display when decoding stops. 5) Click System > Play > Advanced 20532 Crescent Bay Dr.
WWW.GVISION-USA.COM 2) Set what to display when decoding stops. 3.5 Window Set Window border. 1) Click System > Window 2) Set the parameters. Some are described in the table below. Parameter Description Border Off by default, displays window border after opening. Border Color Set border color. Border Width Set border width. 3) Click Save. 3.6 Running Mode Set the running mode and protocol of the device. 2) Click System > Running Mode.
WWW.GVISION-USA.COM 3) Click Save. 3.7 Security Set the security of the device. 3.7.1 Telnet Enable Telnet if you want to access the device from a computer with Telnet. By default the admin username cannot be changed. .. 1) Click System > Security > Telnet. 2) Select the check box to enable Telnet, and then click Save. 20532 Crescent Bay Dr. #104, Lake Forest CA 92630 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.
WWW.GVISION-USA.COM 3.7.2 SNMPv3 Through SNMP the central server synchronizes audio/video channel configurations and some of the scheduled tasks to the device, and the device reports device alarms to the central server. 1) Click System > Security > SNMPv3 2) This page can’t be configured. 3.7.3 Authentication Select digest or null in the Authentication page. Digest access authentication is one of the agreed-upon methods a web server can use to negotiate credentials with server.
WWW.GVISION-USA.COM 3.7.4 Secure Password 1) Click System > Security > Secure Password. 2) Some parameters are described in the table below. Parameter Description Friendly Password You must log in with a strong password except in the same network segment or three private network segments (10.X.X.X/8、172.16.X.X/12、192.168.X.X/16). Enhanced Password You must log in with a strong password. 3) Select password mode, and then click Save.
WWW.GVISION-USA.COM 2) Set the parameters. Some are described in the table below. Parameter Description Working Mode Load Balance. Select NIC Select the network interface. IPv4 Address Set the IP Address. IPv4 Subnet Mask Set the subnet mask. IPv4 Default Gateway Set the gateway. MAC Address Display the mac address. 2) Click to Save. 5 Maintenance The major functions provided on the Maintenance menu are listed in the table below.
WWW.GVISION-USA.COM 2) Some are described in the table below. 20532 Crescent Bay Dr. #104, Lake Forest CA 92630 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.
WWW.GVISION-USA.COM Parameter Description Model The current product model equipment. Serial No. The serial number of the equipment. Firmware Version Device's current software version. Hardware Version Equipment hardware version of the current. Boot Version Current versions of bootstrap equipment. Running Mode The operation of the equipment for the current configuration mode. Access Mode The current access mode of the equipment. Protocol The current equipment access protocol.
WWW.GVISION-USA.COM 5.2 Packet Capture 1) Click Maintenance > Packet Capture. 3) Some are described in the table below. Parameter Description IP Address Set the IP address of the device to capture packets. Port Set the port number of the device to capture packets. 5.3 Maintenance 2) Click Maintenance > Maintenance and then perform maintenance operations as needed.
WWW.GVISION-USA.COM 6 Specifications CHASSIS Dimensions (Inch/mm) Weight Power Consumption Service Board Slots Mixed Insertion Control Board Interface Operation Voltage Temperature Humidity VW-CG Series 17.59” × 18.54” × 5.19” / 447mm × 471mm × 132mm 31.08 lbs (14.
WWW.GVISION-USA.COM 7 Product Photos Front View Quarter View Rear View (The number of In/Outputs are vary) Side View Top View 20532 Crescent Bay Dr. #104, Lake Forest CA 92630 / Tel. 949-586-3338 / Fax. 949-272-4594 / Email. info@gvision-usa.
