Use and Care Manual

- 6 -
Tool Assembly & Instructions
1. Fit the hose on the vacuum cleaner by inserting
the rotating hose connection into the vacuum
cleaner until you hear a click. To remove the
hose, press the button at the side of the hose
connection and pull it out.
2. Assembling the telescope tube and accessories
2.1: Fit the telescopic tube into the other end of the hose by
shoving together and twisting.
2.2: Adjust the length of the telescopic tube by pushing
the locking mechanism down and pulling in the
bottom section of the tube to a suitable length.
When parking, shorten the tube as far as possible.
2.3: Fit the floor tool brush into the telescope tube.
Turbo Carpet Nozzle The turbo nozzle is uniquely designed to vacuum hard floor surfaces,
throw rugs, low pile carpet and thick pile carpet. This allows you to
quickly get your vacuuming done. Keep the brushroll free of hair and carpet string as that will improve
cleaning ability.
Floor Tool
The floor nozzle has two settings. When cleaning hard
surfaces (hardwood flooring, flooring tiles, etc.), the nozzle