Owners Manual GV X12 Vacuum Cleaner GV- We Know Clean! -1-
Contents Safety Instructions ----------------------------------------------------------------3 Components & Equipment -------------------------------------------------------4 Trouble Prevention ------------------------------------------------------------5 Tool Assembly & Instructions ----------------------------------------------------6 Vacuum Operating Instructions -------------------------------------------------7-8 Transportation & Storage ---------------------------------------------------------9 Tech
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNING-to reduce the risk of fire, electric shock, or injury: 1. Do not leave vacuum cleaner plugged in. Unplug from outlet when not in use and before servicing. 2. To reduce the risk of electric shock, do not use outdoors or on wet surfaces. 3. Use only as described in this manual.
COMPONENTS AND EQUIPMENT 6 5 4 8 3 9 7 2 10 11 1 12 1. Floor tool nozzle/ Turbo Brush Nozzle 2. Telescopic tube 3. Parking fixture 4. Tool Caddy 5. Suction release port (for delicate dusting) 6. Suction hose 7. Suction Control Regulator 8. Cord rewinder button 9. ON/OFF button 10. Dust bag change indicator 11. Suction hose connection 12.
PREVENTION Switch off the vacuum cleaner immediately if the air intakes, the floor brushes or the telescope tube becomes blocked. Before starting the vacuum cleaner up again remove the substance causing the blockage: 1. Never use the vacuum cleaner in the immediate vicinity of hot bodies and do not suck up hot objects such as cigarette ends or ashes. 2. Only place the plug in the socket when your hands are dry. 3.
Tool Assembly & Instructions 1. Fit the hose on the vacuum cleaner by inserting the rotating hose connection into the vacuum cleaner until you hear a click. To remove the hose, press the button at the side of the hose connection and pull it out. 2. Assembling the telescope tube and accessories 2.1: Fit the telescopic tube into the other end of the hose by shoving together and twisting. 2.
brushes should be extended. When cleaning carpets and mats, the brushes should be retracted into the nozzle. Press the brush change button to switch between the two settings Crevice/Duster Tool Same tool can be used for dusting or cleaning hard to reach places. Upholstery Tool For furniture, curtains, drapes, couches, etc. VACUUM OPERATING INSTRUCTIONS Vacuum cleaning 1. Before using the device, first roll out a sufficient length of electric cord and plug into the electrical wall socket.
Changing the dust bag If the vacuum’s suction is reduced, this may be because the bag needs changing. Remove the floor attachment from the main wand, set the suction force regulation to MAX, switch on vacuum cleaner using the on/off button, and keep an eye on the bag change indicator. If it is red, the bag must be changed. 1. Turn off and unplug cleaner. 2. Remove the hose, open bag cover by pushing latch up with fingers and lifting bag cover. 3.
1. You can lift and carry the vacuum cleaner using the carrying handle. Never pull or lift the vacuum cleaner by the cord. 2. Before putting the vacuum away, rewind the cord. Switch off the socket, unplug, and press the cord rewind button until the cord is fully rewound. 3. To save space, the vacuum can be stored upright on its end cover. The telescopic tube can be hung on the vacuum cleaner by inserting the parking fixture into the vertical parking holder.
For your records: Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ Note: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim. GV………..
