Use and Care Manual

Removing & Replacing HEPA Dust Bag
To remove the HEPA dust bag from the vacuum:
Important: DO NOT use the vacuum without all filters, shake-out bag, and with or without
HEPA dust bag in place
1. To remove the HEPA dust bag, press on the canister lid tabs on each side of the unit
and lift canister lid. (Fig.15)
2. Pull the tab on the HEPA dust bag holder out slightly and lift upwards.(Fig.15)
3. Holding the HEPA dust bag in your hand, slide it out from the slots in the bag
holder .Hold carefully in order to avoid having dust fall out of HEPA dust bag.(Fig. 16)
4. Replace the HEPA dust bag with a new bag. Do not reuse the same vacuum bag.
5. The cardboard face of the new bag should rest securely in the dust bag cover
guides.
6. Replace the shake-out bag into the vacuum.
7. To replace the HEPA dust bag. holder, flip the holder and press tab until it clicks.
8. Replace the canister lid onto the vacuum.
Warning: Never over fill the HEPA Dust bag – replace when bag is full and clean the
shake-out bag and filter each time the HEPA dust bag is replaced.
FIG 15 FIG 16