Use and Care Manual

Manual Suction Control
Your vacuum cleaner includes a manual variable suction control on the flexible hose
handle. The suction power can be adjusted by moving the suction regulator to the
desired position between open and Closed. (Fig. 12)
Fig 12
Using Your Vacuum
1. Ensure the battery pack is correct assemble in the vacuum
2. Connect hose and telescopic tube if desired.
3. Correctly place shoulder straps on each shoulder and secure the waist band with hook
and loop strips. (Fig.13)
Caution: If the waist band and both Shoulder straps are not properly and Securely in
place the unit could fall off your back causing damage or injury.
4. Turn the unit on by pressing the switch located near the base of the unit to turn the
vacuum cleaner on. (Fig.14)
FIG 13 FIG 14