Use and Care Manual

Attaching the Flexible hose to The vacuum
The flexible hose should be connected to the Vacuum before strapping the unit on.
1. To connect the flexible hose into the hose inlet, insert the threaded end of the flexible
hose into the hose inlet and turn counter-clockwise until it locks into place. (Fig 6)
2. Turn on the switch than you can operate the vacuum.
3. To remove the telescopic tube from the flexible hose, press on the telescopic tube
release button and pull it out. (Fig.7)
4. Step on the Floor to Carpet selector to adjust the height of the brushes. There are two
different heights one for floors and the other for carpets. (Fig.8)
5. To remove the telescopic tube from the floor to carpet brush, pull the telescopic tube
out from Floor to Carpet Brush