Use and Care Manual

BATTERY PROTECTION FEATURE
The 25.2-volt Lithium Polymer batteries are designed with features that protect the Lithium
Polymer cells and maximize battery life. When the battery has reached its minimum
voltage level the electronics will shut off the battery. Once the battery shuts off, it must be
recharged.
PREPARING BATTERY PACK FOR CHARGING
1. Turn off the power switch. Confirm the switch is on the “O” position.
2. Unlock the battery pack by turning knob clockwise and take the battery pack out from
the vacuum.(Fig 17)
3. Plug the round connector on the charger’s cord into the battery pack. (Fig 18)
4. Plug the charger’s power cord into 120V wall outlet (Fig 19)
5. The Battery pack may require approximately 8 hours to full charge.
Note: Battery pack may get warm while charging.
Before you assemble the battery pack back into the vacuum, please check the switch is
on the “O” position
Fig 18
Fig 17 Fig19