User Manual
STREAM USERS MANUAL
PAGE 11
3) Place a new carbon block filter element in the cannister. Continue to hold the Stream with the lid
side down. Ensure top and bottom gaskets are in place, and filter cartridge is centered on mounting
posts. Make sure cannister o-ring is properly seated and cartridge gaskets are in place. Thread the
cannister onto the filter housing base. Tighten cannister firmly, making sure o-ring seats and seals.
4) Set up Stream for Pressurized or Unpressurized Operation, and turn on and run for 5 minutes,
checking for leaks, and allowing any carbon fines to flush out of new carbon block filter cartridge.
REPLACEMENT CARBON BLOCK CARTRIDGE
Guzzle H2O 5” Carbon Block Cartridge
Pentek CB-5
0.5 micron Activated Carbon Block Filter Cartrdige
HOW TO INSTALL THE CARBON BLOCK FILTER CARTRIDGE (CONT):