Instructions / Assembly

NOTE:
Some gutter straps, like those that are called “Hidden Hangers” are
positioned in the gutter at a lower point making it difficult to push
the foam under the strap. In this situation you will make a “T” cut
into the foam so the foam can straddle the strap (like riding a
horse). The cut will start on the bottom of the foam and cut up
towards the top (the part of the foam filter facing the sky) without
cutting all the way through the foam. At the top of the vertical cut
line you will make a horizontal cut (Creating the “T”) across the
top of the vertical line, only as wide as the gutter hanger is wide.
You will only make your vertical cut into the foam as far as you
need to have the foam straddle the gutter hanger. The gutter
hanger will fit nicely into the “T” cut.
Visit www.gutterstuff.com to see installation video.