Use and Care Manual

of the gutter. Slide Gutter Pro into the gutter under each spike or hanger then
tuck the front edge of the material under the lip of the gutter.
Final Steps
Final StepsFinal Steps
Final Steps
Place the foam sections into the gutter end to end, making sure there are no
gaps between sections. A knife or scissors may be used to cut any excess
material, if needed, at the end of each run. At corners or angles, use a miter cut
to create a channel for the water to flow freely. Do not stretch the material to
make it fit as it will shrink back to its original form and leave gaps.
Maintenance
MaintenanceMaintenance
Maintenance