Instructions / Assembly

8
STEP 3: Two very important installaon rules
Follow these two rules so rainwater flows smoothly into your gutter and not over the front edge of your gutter.
RULE #1
Remove gap: Make sure the front lip of the gutter guard is flat against the front lip of your gutter to remove any gap.
RULE #2
Trough depth: The stainless steel mesh trough must be
at least 1/8th of an inch below the front lip of the gutter. It
generally lays naturally like this, but sometimes you
need to push the mesh trough down just a little. This can
happen on steeply pitched roofs or gutters that are hung
low (1 inch or greater) below roofline.
Front of guer
Gap
Front lip of
gutter guard
PUSH DOWN FLAT
TO REMOVE GAP
Actual photos of gutter guard on top front lip of gutter.
The trough must be
below the front top lip
of the gutter by at
least 1/8th of an inch.
Front top lip of guer
Front top lip of guer guard
PUSH DOWN FIRMLY
WITH YOUR FINGERS.
Stainless steel
mesh trough
Guer
Roof shingle
Guer Guard
Fascia
wood
Tech Support
[phone]
[e-mail]