Instructions / Assembly
7
Step 2.6
Outside corner of gutter
Push rear aluminum strip down in gutter. Mark adjacent section and trim off.
The aluminum extrusions can be tough to cut, so it’s ok to notch them (F), then you can snap them in two with your hands. The
tin snips will cut through the mesh easily.
Step 2.7
Cutting sections
Use a sharp knife and cut tape between the gutter guard and
gutter. You will have to screw it back down to reinstall.
Removing gutter guard
F
Flat bars used to lift up tile. Bending mesh to fit small gutters. Using flat bars to lift up wood shake.
Robert
“Check out the How-to-Install tab at
my website for more guer and roof
install techniques like shown below.”
Other install techniques