Use and Care Manual

Follow these rules to ensure proper installation of your gutter guard.
RULE #1
Remove gap: Front frame of the gutter guard should be flat against the front lip of your gutter.
RULE #2
Trough depth: The mesh trough must be at least 1/8th of an inch below the front lip of the gutter. This adjust-
ment may need to be made on steeply pitched roofs or gutters that are hung low 1 inch or more below roofline.
Front lip of guer
Gap
Front frame of
gutter guard
PUSH DOWN FLAT
TO REMOVE GAP
The trough must be
below the top of the front
lip of the gutter by at
least 1/8th of an inch.
Front lip of guer
Front frame of guer guard
PUSH DOWN FIRMLY
WITH YOUR FINGERS.
Stainless steel
mesh trough
Guer
Fascia
wood
Support
866-892-8442
[e-mail]
6
Don’t Miss These Steps!