Use and Care Manual

Select the diagram that best resembles your gutter and roof configuration. This will
determine your recommended installation method. Once you have selected a diagram,
continue to the Install Basics.
Guer
Fascia
wood
DIAGRAM A
Traditional gutter and roof configuration:
Slide gutter guard under roof shingles.
IMPORTANT: If your roofing material is
adhered to your underlayment, do not use
this method, use either bending method in
Diagram B to install your gutter guard.
DIAGRAM B
Gutter hung low: Bend mesh either up or down,
then fasten to the gutter, drip edge or fascia with
screws.
Guer
Fascia
wood
OPTION 1:
Bend mesh up
OPTION 2:
Bend mesh down
DIAGRAM C
Steep roof: Slide it under the roof shingle, if it causes the roof
shingle to ramp up or your roofing material is adhered to your
underlayment, see diagram F and bend the mesh up or down
and fasten to the gutter, drip edge or fascia with screws.
Guer
Fascia
wood
OPTION 1:
Bend mesh up
OPTION 2:
Bend mesh down
Support
866-892-8442
[e-mail]
Choose Install Method
4