Instructions / Assembly

3
STEP 1: …. connued ….
DIAGRAM F
Roof Ramping. If the gutter guard causes the shingles to ramp up,
then bend the mesh down and then slide back under the shingle.
This can occasionally happen on a low hanging gutter.
DIAGRAM D
Flat roof. The mesh can be bent up or down and
fastened to the back of the gutter or fascia with screws.
DIAGRAM E
Use screws to hold up gutter guard. Sometimes the
gutter guard isn’t long enough to go under the shingles.
You can put 3 screws in the back gutter or fascia wood
for holding up each section of the gutter guard.
Guer
Roof shingle
Guer Guard
Screw for holding
up guer guard.
Fascia
wood
Guer
Guer Guard
Roof shingle
Roof ramping
Fascia
wood
Guer
Roof shingle
Guer Guard
Fascia
wood
“If you don’t see you guer
and roof conguraon, visit
www.GuerGuard.com and view
other scenarios or email me at
Info@GuerGuard.com”
Robert
Flat roof
Guer
Guer Guard
Fascia
wood
OPTION 1:
Bend mesh up
OPTION 2:
Bend mesh down
Tech Support
[phone]
[e-mail]