User's Manual

9 I 19
Switch the Link on and tap Synchronise
Deploy the Red Sensor first using the tablet to plot the sensor position. If the GPS
position is not accurate enough, you can move the map with your finger (zooming in
increases position accuracy). Then tap the green arrow to confirm. Repeat for the
Blue sensor and the correlation starts.
A timer counts down until the measurement is completed
The EASYSCAN App will instruct the user to collect the Sensors.
Once collected tap next to download the data.
Choose the pipe type straight or bent (mixed material) and enter the pipe type plus
diameter.
The result is displayed with a correlation quality % in the top lift of the screen and
the distance from Red and Blue sensors in the bottom of the screen as shown