User's Manual
8 I 19
4 EASYSCAN Link
On/off: The link can be switched on and off by using the push-button on the side. The
LED will blink every 2 seconds when the link is on.
Charge: Connect the link with the USB cable to a USB 2.0 or higher port to charge.
The LED will blink fast to indicate the charging process.
Battery status: The status can be seen in the top icon bar on your android device.
The link needs to be connected to your device for this.
Easyscan link with push-button and LED
Easyscan link cable and socket
5 Correlation
Hardware: For a description of how to prepare your hardware for the correlation operation,
please refer to section 9 of this manual.
In your App:
Tap on the Correlation Symbol in the Main Screen
Use the +/- symbols to enter a time delay before correlation starts then tap OK. Note:
allow enough time to open the chamber covers and attach the sensors to both fittings.