User's Manual
7
2.1.
2.2. InitialZS800CommlinkSetup
IdentifytheCommlink,doesitrequireacableorBluetoothto
connecttoacomputer.Ifit’sacablecontinuewiththissection.
Ifit’saBluetoothgotoSection2.3.
The pathway of communication between the Commlink,
Zonescan software and the computer’s communication ports
require co
nfiguration before the loggers can be used. [Fig.1
Connect the System Communication Link via the
CommunicationCableto anunusedCOMportofthePC.Ifthe
computer does not have a RS232 inbuilt socket then a USB to
RS232 adaptor will be required. USB to RS232 Adaptors are
availablefromacomp
uterdealer.
Fig.1commlinkpicture
In Windows go to device manager and expand the Ports to see which COM Port the Zonescan
Commlink or USB to RS232 serial port adaptor is assigned to. [Fig.2 in the Zonescan software check
COMport setting: select menu commandFile‐Options‐Setup, thenselect Connection and modify
settingifnecessary.
Fi
g.2settingup communication port