User's Manual

ZONESCAN net 34 / 56
Version 1.4
The date on which the repeater was reached for the last time.
Current battery charge of the individual repeaters.
Version of the respective repeater
The lowest temperature measured during the last measurement.
The highest temperature measured during the last measurement.
Comments is a text field with entries on, e.g., permanent noise sources.
4.2.2 Options
You can change the base settings of this tab by right-clicking an entry in the
table.
Figure 33 Logger settings
To display the History of when the Repeater had communication with the
Zonescan Net
To display the Minimum Temperature of the selected Repeater, click the
Min Temp item.
To display the Maximum Temperature of the selected Alpha, click the Max
Temp item.
To display the charge state of the selected repeater, click the Battery
History item.
To add a comment about a repeater, select the Comments item. Enter the
desired comment in the text field that appears. Click Apply to save the
entered comment. The text is displayed in the table in the Comments field.
Last Reached
Batt.
Version:
Min Temp.
Max Temp.
Comments
Reachability History
Min Temp History
Max Temp History
Battery History
Comments