User's Manual

45 / 56 ZONESCAN net
Version 1.4
Presets tab
Figure 41 Settings > Presets
dBEnv:
Determine this value together with the manufacturer to obtain the most
accurate evaluations of the measurement data.
Pipe Length:
Enter the distance between two loggers.
Preset: 600m
Attention!
Incorrect evaluations will result if the entered length is shorter
than the actual pipe length. Enter a value here that exceeds the
actual spacing between the loggers.
Example:
actual pipe length: 255m
entered pipe length: 600m
Pipe Material:
Select your pipe material from the drop-down list.
Preset: Ductile Iron
Pipe Diameter:
Select your pipe diameter from the drop-down list.
Preset: 100mm
Leak Score Presets
Pipe Presets