User's Manual

33 / 56 ZONESCAN net
Version 1.4
Click Add Alpha to add a not-yet existing Alpha to the list. In the window
that opens, enter the values for Alpha No., Location, Latitude and
Longitude. Click the check box to select the logger to which you would like
to assign the Alpha. After entering all values, confirm your entries by
clicking the Save button.
To make changes to the base settings of existing Alphas, select Edit Alpha.
Make the desired changes and then click Save.
Alphas listed in the table can be deleted with the Delete Alpha item.
To delete the measurement data of an Alpha, click the Delete Alpha's
Measurements item.
Use this item to delete all Alphas for the current project.
The measurement data of all Alphas is deleted by clicking this item.
4.2 Repeater tab
In the Repeater tab, all repeaters of the current project are displayed.
Figure 32 Repeater Tab
4.2.1 Table fields
Reference number of the displayed repeaters.
Add Alpha
Edit Alpha
Delete Alpha
Delete Alpha's
Measurements
Delete All Alphas
Delete All Alphas'
Measurements
Repeater No.