User's Manual

50 I 72
To display the History of when the Logger had communication with
the ZONESCAN NET
To display the Minimum Temperature of the selected Logger, click
the Min Temp item
To display the Maximum Temperature of the selected Logger, click
the Max Temp item
To display the charge state of the selected Logger, click the
Battery History item
To add a comment about a Logger, select the Comments item.
Enter the desired comment in the text field that appears. Click
Apply to save the entered comment. The text is displayed in the
table in the Comments field
To view an available Picture of the selected Logger. The Picture
should have been taken and uploaded by ZONESCAN Mobile
during the installation process
To Print out a report for the selected Logger to include all the fields
in the Table
Click Add Logger to add a not-yet existing Logger to the list. In the
window that opens, enter the values for Logger No., Location,
Latitude and Longitude. After entering all values, confirm your
entries by clicking the Save button
To make changes to the base settings of existing Loggers, select
Edit Logger. Make the desired changes and then click Save
Loggers listed in the table can be deleted with the Delete Logger
item
To delete the measurement data of a Logger, click the Delete
Logger's Measurements item
Click Delete Logger's Sound Signals to delete the recorded signals
Use this item to delete all Loggers for the current project
The measurement data of all Loggers is deleted by clicking this
item
Click this item to delete the sound signals of all Loggers
Reachability History
Min Temp History
Max Temp History
Battery History
Comments
Picture
Maintenance
Add Logger
Edit Logger
Delete Logger
Delete Logger's
Measurements
Delete Logge
r's
Sound Signals
Delete All Loggers
Delete All Loggers'
Measurements
Delete All Loggers'
Sound Signals