User's Manual
66
21 Functionbuttons
Thefunctionbuttons arearrangedonsub‐panelsthatcan beeasily rearrangedandeven bedetachedfrom
themainwindowbygrabbingtheleftsidewiththetwoverticallinesanddraggingthemtothedesirednew
position.Ashortdescriptionofthefunctionofeachbutto
nisdisplayedbymovingthemousecursoroverthe
button(withoutpressingthebutton)andwaitingashorttime.Thebuttonsprovidethefollowingfunctions:
Synchronize all loggers: Initiates the synchronization process that transfers data from and to the
loggers
Logger state:Opensthe Logger State window that displays settings and data oftheactual selected
logger (hi
ghlighted entry in the logger list of the main window). Logger state only can be displayed
when the logger can be reached by radio transmission. It also allows remote listening of the sound
signalrecordedbythelogger
Loggersetup:Displaysth
eLoggersetupwindow.
Show measurements: Displays measurement window to view measurement results including leak
valueandamplitudedistribution(seeViewLoggerMeasurements).
Show signal graphics: Displays sound signals that have been recorded and stored for Correlating
soundsignals.
Correlate sound signals: Displays a window that allows Correlating of sound signals in case
appropriat
esoundsignalshavebeenrecorded.
Executeall correlations: Displays a windowthat allows thecorrelationof all possiblecombination
ofloggers.Correlationrecordingsmustbemadetomakethispossible.
Showmap:OpenstheLoggerMap,agraphicaloverviewofthedeployedloggers
Setup:DisplaystheprogramSetupwindow.
Printreport:Printoutofthetabularloggerlist
Findlogger:Opensasmallwindowforsearchingacertainloggerbyloggerno.