User's Manual

3. CreatinganewDatabase



StarttheZonescansoftwareinstandardprofessionalmode,seepage63.TheZonescanLoggersare

individuallyidentifiedbyaserialnumberwhichisstampedonthetopofthelogger.Thisserialnumberis

usedbytheZonescansoftwareasameansofcommunicatingwitheachl

ogger.Fig.3showshowto

createaNewProjectbyselectingFilefromthemenubarandthenselectingNewProjectfromthepull‐

downmenu.



Fig.3file newproject



ThecursorwillflashintheboxwheretheProjectnameneedstobeentered.Useanamewhichhelpsidentify

theareawheretheloggersaredeplo

yed.







Fig.4name new project