User Manual

- 2 -
For convenience, go to www.GunVault.com/warranty to fill out the warranty
registration or call our Customer Service Department at 1(800)222-1055.
Please fill out the section below and store in a safe location OUTSIDE of your
SpeedVault
®
.
MODEL NUMBER
____________________
(THIS CAN BE FOUND ON THE INSIDE ROOF OF THE UNIT.)
SERIAL NUMBER
____________________
(THIS CAN BE FOUND UNDER THE MODEL NUMBER ON THE INSIDE ROOF OF THE UNIT.)
KEY NUMBER
____________________
(THIS CAN BE FOUND ENGRAVED INTO THE LOCK ITSELF)
Mounting Positions:
Using the provided bracket, the
SpeedVault
®
Biometric can be
mounted from the:
 Left
 Right
 Back
 Top
Unit must be mounted at a 90 angle as the door is gravity operated.
This information is necessary when ordering replacement keys or filing a warranty claim.
Tools Needed:
 Phillips-Head Screw Driver
 Needle Nose Pliers
 9V Alkaline Battery
Optional Tools:
 Power Drill
 Phillips-Head Bit
GETTING STARTED
WARRANTY
REGISTRATION
GunVault
®
Tip: For best performance, use a battery with expiration date 4 years out. We
strongly advise to get name brand batteries and avoid lithium, duralock, & rechargeable
batteries. Only use alkaline batteries.