User Guide

ManualsBrandsGunVault ManualsGun & Ammunition Storage & SafesGunVault SVB500 Speedvault Biometric combination Black

Loving your new GunVault safe and wanting to purchase more?

Check out our website www.GunVault.com for special promotions, safes, accessories and more information.

Mute Button Feature

This feature turns audio for unit o and on.

Step 1: Open the unit and locate the Mute button

on the interior roof of the unit.

Step 2: Press and hold the Mute button for three se-

conds. While holding the mute button, the indicator

light will remain solid red. When the indicator light

ashes green and beeps 3 times this will indicate a

successful activation.

Step 3: Now you have successfully activated/deac-

tivated the mute feature.

Safe Categories:

• Digital Safes

• Biometric Safes

• AR Safes

Safes, Accessories and More!!!

Accessories:

• Security cable

• MagVault

Vital Information:

• Downloadable manuals

• How–to video tutorials

• Warranty registration

• Frequently asked questions

• And MORE

Safe Feature Section Biometric Unit Only

Installing Bumper Bracket

Step 1: Locate the bumper bracket installation holes on

the bottom of the unit.

Step 2: Once located, align the Bumper Bracket with

the installation holes.

Step 3: Proceed to securing fasten the Bumper Bracket

to the unit with the provided screws and screw driver.

Step 4: You have successfully installed the Bumper

Bracket.

Internal Courtesy Light

• The interior courtesy light feature becomes activated

for ve seconds after every time the safe door opens.

This feature allows you to have a clear view of the

interior and all the safe contents.

SCAN QR CODE TO VISIT OUR WEBSITE

FOR FAQ'S, VIDEO TUTORIALS, AND MORE.

Low Battery

Warning Indicator

Step 1: When you enter the correct combination

and the battery is low, the indicator light will ash red

and beep six times. Depending on the low battery

level, the unit may sound when releasing the lock. If

the battery level is too low, the indicator light will start

to ash red and beep continuously until the battery is

removed from the unit. If the battery in the unit is

completely depleted, you will hear only a light humming

sound.

Step 2 : Replace battery by using steps in section labe-

led “Battery Installation”.

*You must be opening your unit in order low battery

indicator to alert you.