MSDS

MSDS - Material Safety Data Sheet
Friday, April 12, 2013
Page 3 of 5
Product Name: PARTS WASHER SOLVENT
MSDS No.: SCS5
Other LimitsOSHA PEL ACGIH TLVChemical Name
100 ppm100 ppmAliphatic Hydrocarbon Solvent
Not Available
25 ppmN/E1,2,4-Trimethylbenzene
Not Available
25 ppm (TWA)25 ppm (TWA)Trimethyl benzene
Not Available
5 mg/m35 mg/m3Hydrocarbon Fluid
Not Available
N/EN/ETripropylene Glycol Monomethyl Ether
Not Available
N/EN/EPolyoxyethylene Hexaoleate
Not Available
50 ppm50 ppmIsopropylbenzene
Not Available
100 ppm100 ppmEthylbenzene
Not Available
10 ppm10 ppmNaphthalene
Not Available
See Section above for applicable exposure limits. Use with adequate ventilation. If TLV is exceeded, wear NIOSH approved respirator.
Engineering Controls:
Personal Protective Equipment:
For prolonged exposure wear protective safety glasses, gloves, and apron.
Evaporation Rate (Butyl Acetate = 1): N/DSolubility In Water: Emulifies
N/DN/D
Freezing Point:Boiling Range:
Melting Point: N/ABoiling Point: >315°F
IX. Physical and Chemical Properties:
Flash Point Method: TCCFlash Point: 108°F
N/D
Odor Threshold:
Appearance and Odor:
Clear amber to yellow liquid with
petroleum odor
Vapor Density (AIR = 1): N/D Vapor Pressure (mm Hg.): 0.63 @ 20°C
pH Range: Partition Coefficient:
Decomposition Temp: Auto-Ignition Temp: N/D
Specific Gravity (H20 = 1): 0.79
Other Information: N/D
Lower Explosive Limit: N/E Upper Explosive Limit: N/E
N/A
N/D
N/D
Stable
Stability:
X. Stability and Reactivity:
Avoid heat, sparks or flame. Keep away form heat. See Incompatible Materials belowl
Conditions to Avoid:
Strong oxidizing agents.
Incompatible Materials:
Hazardous Decomposition Products:
High temperatures and ignition sources produce products of combustion: carbon monoxide, sulfur-like smoke.
Possibility of Hazardous Reactions:
Will not occur.