MSDS

MSDS - Material Safety Data Sheet
Wednesday, July 14, 2010
Page 3 of 5
Product Name: ENGINE BRITE HEAVY DUTY ENGINE DEGREASER
MSDS No.: EB5
Other LimitsOSHA PEL ACGIH TLVChemical Name
100 ppm N/EN/EPetroleum distillate, Aliphatic
N/E 100 ppmN/E Petroleum naphtha
5 mg/m35 mg/m3Petroleum Distillate, Hydrotreated Middle
Not Available
N/EN/EPolyoxyethylene Hexaoleate
Not Available
10 ppm10 ppmNaphthalene
Not Available
100 ppm100 ppmXylene (mixed isomers)
Not Available
25 ppmN/E1,2,4-Trimethylbenzene
Not Available
See Section above for applicable exposure limits. Use with adequate ventilation. If TLV is exceeded, wear NIOSH approved respirator.
Engineering Controls:
Personal Protective Equipment:
For prolonged exposure wear protective safety glasses, gloves, and apron.
Evaporation Rate (Butyl Acetate = 1): N/DSolubility In Water: Emulifies
N/DN/D
Freezing Point:Boiling Range:
Melting Point: N/ABoiling Point: 305°F
IX. Physical and Chemical Properties:
Flash Point Method: TCCFlash Point: 176°F
N/D
Odor Threshold:
Appearance and Odor:
Red liquid with petroleum odor
Vapor Density (AIR = 1): N/D Vapor Pressure (mm Hg.): N/D
pH Range: Partition Coefficient:
Decomposition Temp: Auto-Ignition Temp: N/D
Specific Gravity (H20 = 1): 0.87
Other Information: VOC Content: < 4% (by wt.)
Lower Explosive Limit: N/D Upper Explosive Limit: N/D
N/A
N/D
N/D
Stable
Stability:
X. Stability and Reactivity:
Avoid heat, sparks, and flames. Avoid incompatible materials.
Conditions to Avoid:
Strong oxidizing agents.
Incompatible Materials:
Hazardous Decomposition Products:
High temperatures and ignition sources produce products of combustion: carbon monoxide, sulfur-like smoke.
Possibility of Hazardous Reactions:
Will not occur.
XI. Toxicological Information:
N/D