Technical Specifications

Gumout 2X Fuel Injector/ Carburetor Cleaner
MSDS# 10708
Version 2.0
Effective Date 11/17/2009
Material Safety Data Sheet
According to OSHA Hazard Communication Standard, 29 CFR
1910.1200
6/8
Print Date 11/20/2009 MSDS_US
nervous system (CNS) depression resulting in dizziness, light-
headedness, headache, nausea and loss of coordination.
Continued inhalation may result in unconsciousness and death.
Sensitisation
: Not expected to be a skin sensitiser.
Repeated Dose Toxicity
: Not expected to be a hazard.
Mutagenicity
: Not considered a mutagenic hazard.
Carcinogenicity
: Not classified as a carcinogen.
Reproductive and
Developmental Toxicity
: Not expected to be a hazard.
12. ECOLOGICAL INFORMATION
Ecotoxicological data have not been determined specifically for this product. Information given is
based on a knowledge of the components and the ecotoxicology of similar products.
Acute Toxicity
: Poorly soluble mixture. Expected to be toxic: LL/EL/IL50 1-10
mg/l (to aquatic organisms) (LL/EL50 expressed as the
nominal amount of product required to prepare aqueous test
extract).
Mobility
: Liquid under most environmental conditions. Floats on water.
Contains volatile components. Partly evaporates from water or
soil surfaces, but a significant proportion will remain after one
day. If it enters soil, it will adsorb to soil particles and will not be
mobile.
Persistence/degradability
: Expected to be not readily biodegradable. Major constituents
are expected to be inherently biodegradable, but the product
contains components that may persist in the environment. The
volatile components oxidise rapidly by photochemical reactions
in air.
Bioaccumulation
: Contains components with the potential to bioaccumulate.
Other Adverse Effects
: Not expected to have ozone depletion potential, photochemical
ozone creation potential or global warming potential.
13. DISPOSAL CONSIDERATIONS
Material Disposal
: Recover or recycle if possible. It is the responsibility of the
waste generator to determine the toxicity and physical
properties of the material generated to determine the proper
waste classification and disposal methods in compliance with
applicable regulations. Do not dispose into the environment, in
drains or in water courses.
Container Disposal
: Drain container thoroughly. After draining, vent in a safe place
away from sparks and fire. Do not, puncture, cut, or weld
uncleaned drums. Dispose in accordance with prevailing
regulations, preferably to a recognised collector or contractor.
The competence of the collector or contractor should be
established beforehand.
Local Legislation
: Disposal should be in accordance with applicable regional,
national, and local laws and regulations.