User's Manual

Z
HISHENDO
CCENTER
Mounting Method
1.Loosen the thumb screw on
t h e b a c k o f t h e r e m o t e
controller to let loose of the
rubber case (as marked red in
the Figure).
2.Install the remote controller to the extension rod or
dual handle for convenient operations (as shown in the
Figure above). Fasten up by tightening the thumb screw
on the back.
32
31
zhiyun-tech.com zhiyun-tech.com
ZW-B02 Remote Controller
MODE Button
Power/Shutter
(Dual-function button)
Bluetooth Indicator
Power Level Indicator
Joystick
Toggle
Charging Indicator
Usage of Main Accessories
Usage of Main Accessories
Power/Shutter (Dual-function button):
1.Press for 1-2 seconds to power on/off (enters Master Mode by default):
2.Fully press for 1-2 seconds to power off (the indicator light turned off accordingly)
3.When the stabilizer is connected to camera:
Halfway press the button, under photo mode, to focus; Full press to take single shots; Quick
double press (full press) to switch between video and photo shooting.
Combined Button Control
Power Button + toggle: Push the toggle in W direction simultaneously when powering up to
enter Slave Mode. This allows firmware upgrade of the remote controller through mobile APP
(requires Bluetooth pairing with the smartphone using Zhiyun Assistant).
Power Button + MODE Button: Press the MODE Button simultaneously when powering up to
operate quick pairing with the nearest stabilizer.
MODE Button: Switches between gimbal control modes (works like the MODE button on the
stabilizer).
Joystick: Controls camera movement (functions the same as the Joystick on the stabilizer.)
Toggle: Allows focusing control of the camera.
Basic Specifications:
Charging voltage: 5V
Charging current: 100mA
Theoretical work time: ≥30 hr.
Built-in Polymer lithium battery
capacity: 150mAh
Emission and received current:
11.9mA
Operating current: 4.2mA
Effective control distance: 10M
(without blockage)
Power Level Indicator
90%-100%: quick flash for 4
times each second.
75%-90%: quick flash for3 times
each second.
55%-75%: quick flash for2 times
each second.
30%-55%: quick flash for1 time
each second.
0%-30%: quick flashing.
Bluetooth Indicator
No connection: Continuous flashing.
Connected: Shines solid light.
Charging Indicator
Charging: RED light.●
Charging complete: GREEN light.●
The remote controller turns off automatically when left idle for 2 minutes.
Main body of the remote controller can be easily separated from the mounting buckle for
independent use. The mounting buckle is for fix mounting only and will not affect
performance of the remote control after separation.