User's Manual

Table Of Contents

HISHENDO

CCENTER

5.开机与启动

zhiyun-tech.com

STEP 4

STEP 5

STEP 6

Firmware upgrade

Motor fine-tuning

Fine tune the motor through stabilizer:

Power on the stabilizer and enter standby mode, then rotate the dial and press right to enter the

“angle” option; Adjust the value of the tilt and roll axis angle to your actual needs.

Calibration and Firmware Upgrade Calibration and Firmware Upgrade

Six-side calibration through APP

Please refer to “APP Operations” for more information; Connect the stabilizer to

ZHIYUN's APP - ZY Play - via Bluetooth, enter “calibration” and finish the six-side

calibration following the APP instruction.

Six-side calibration is to make all six sides of the camera mounting plate vertical to the level

surface.

Fine tune the motor through APP:

Please refer to “APP Operations” for more information; Connect the stabilizer to ZHIYUN's APP -

ZY Play - via Bluetooth, then enter “Gimbal Setting” screen and adjust the value of the tilt and roll

axis angle to your actual needs.

Make sure the batteries have been

properly installed before upgrade.

Connect the stabilizer to your computer via Micro USB cable to get ready for the firmware

upgrade and calibration.

1.Visit ZHIYUN's offcial website: www.zhiyun-tech.com Click “DOWNLOAD” and find the

Firmware Upgrade Tutorial package, then download the driver, calibration tool and latest

firmware corresponding to your stabilizer. (USB driver installation is not needed for Mac

and WIN 10 system).

2.Connect the stabilizer to your computer via Micro USB cable, power on the stabilizer and

finish the installation of the driver.

3.Power on the stabilizer and long press mode button to enter standby mode.

4.Enter the downloaded “Zhiyun Gimbal Tools” and upgrade firmware following the

instructions indicated in the Firmware Upgrade Tutorial.

USB