User's Manual

Z
HISHENDO
CCENTER
20
19
zhiyun-tech.com zhiyun-tech.com
Motor Force Adjustment
Medium (default)
High
Motor Force
Weight Capacity
Light
Medium
Heavy
Compatible Camera & Lens Examples
Sony A7S Camera+SEL35F28Z Lens
Canon 5D Camera+EF 50mm F/1.8 ⅡLens
Canon 5D Camera+EF 24-70mm f/2.8 L ⅡUSM Lens
Camera Control Cable Configuration
Low
Please choose the corresponding option to configure your camera control cable.
1. Single press Menu and
rotate the dial to “camera”,
then press right to enter the
“camera” setting.
2.Rotate the dial to choose your
camera brand, press right to
confirm the option and restart
the stabilizer to finish.
Mode Switch
Pan Following Mode (PF): The
camera pans left/right following
the movement of the stabilizer
while the tilt and roll axes are
l o c k e d . P u s h t h e j o y s t i c k
up/down allows manual control
of the tilt axis.
Following Mode (F): The camera
p a n s a n d tilts f o l l o w i n g t h e
movement of the stabilizer. Push
t he j oyst i c k l e f t /rig h t a l l o ws
manual control of the roll axis.
Locking Mode (L): This mode locks
movement of all three axes to
keep t h e c a m e r a fixe d o n a
s hoo t i ng dire c tio n . P u sh the
joystick up/down and left/right
allows manual control of the tilt
axis and pan axis.
Double pressMODE
Single pressMODE
Single pressM
ODE
Single pressMODE
Double p
res
sMODE
Single pre
ssMODE
The stabilizer enters Pan Following Mode (PF) by default
each time when powered on. Switch into Locking Mode(L)
by single pressing on Joystick. Double press Joystick to
enter Following mode (F) . Single press Joystick under
Following Mode will return to the previous mode.
Tilt Axis
Pan Axis
Roll Axis
Control Mode Description
How to Use
How to Use
The motor force of the stabilizer needs to be adjusted (3 levels) to adapt the stabilizer to
cameras and lens of different weight for ideal use.
1.Sing le press Menu and
rotate the dial to “motor”,
then press right to enter the
“motor ” setting.
2.Rotate the dial to choose
the appropriate motor force
( 3 l e v e l s ) , p r e s s r i g h t t o
c o n f i r m t h e o p t i o n , th e n
restart the stabilizer to finish.
Either the motor force is set too high or too low (unmatched with weight capacity) can lead
to camera shake and affect normal use of the stabilizer.
If there is no option to match your camera brand or there is no need to connect your camera,
choose “Close”.
1.You need to restart the stabilizer to finish adjustment and configuration of motor force
and camera control cable.
2. After re-setting the parameters, the stabilizer will enter standby mode, please long press
mode button to activate the camera.
Pan-
Following
Mode (PF)
Locking
Mode (L)
Following
Mode (F)
Tilt Axis
Pan Axis
Roll Axis
Tilt Axis
Pan Axis
Roll Axis