User's Manual

Z
HISHENDO
CCENTER
5.开机与启动
Balance Adjustment
14
13
zhiyun-tech.com zhiyun-tech.com
Level Adjustment on Tilt Axis
Balance Adjustment on Tilt Axis
Balance Adjustment on Roll Axis
The balance status of the stabilizer will greatly affect the run time.
Please make sure the camera is properly mounted and balanced, otherwise the stabilizer
may fail to start or operate normally.
Loosen the thumb screw on the quick release
plate so that it can slide forward or backward.
Hold the horizontal arm on the tilt axis with
one hand and adjust the position of the camera
to find a level balance where the the camera
can stay still and almost level with its lens
facing front, complete this step by tightening
up the camera mounting thumb screw.
Balance Adjustment
Loosen the thumb screw (rotate about 3 times); Adjust
the tilt axis until the camera can stay still with the lens
facing up (i.e. the camera stays still and vertical to the
ground), complete this step by tightening up thumb
screw.
Loosen the thumb screw (rotate about 3 times); Adjust
the tilt axis until the camera can stay still with the lens
facing up (i.e. the camera stays still and vertical to the
ground), complete this step by tightening up thumb
screw.