User's Manual

Modes / Functions
6 7
Connect to APP
（2） Use the up and down sliders to adjust the vertical center of gravity
Best Balance
（2）b
（2）a
Leaning front
Leaning after
Leaning right
Leaning left
Tip: The screw can be twisted to adjust, please do not twist the adjustment screw out of the slider.
A
A
已连接的设备
没有连接的设备
选择一个设备
FY_SPG_XX
D7:58:42:2D:DD：xx
正在搜索...
取消
Rssi=xx
连接成功
Power on / off
Power On： Press and hold function button
until the green light is on.
Power Off： Press and hold function button
until the red light changes from quick flashing
to constant.
Attention: Make sure the
camera is secure before
power on the Gimbal.
!
In case of low battery, the indicator will
light red and flash 3 times every 5 seconds.
Please charge G360 or replace the battery.
Start the app on your smartphone,follow the instructions
to connect the smartphone with gimbal via Bluetooth.
Working Modes
Reset
Stand-by
Other Functions
Shutdown all motors.
Hold the direction of camera lens.
Panning Mode
Hold the tilting and rolling direction of camera lens,
camera lens will move along with handle moving.
Panning and Tilting Mode
Hold the rolling direction of camera lens, camera
lens will move along with handle moving.
Lock Mode
* The gimbal will work on Panning Mode after power on.
Reset to power on status.