Instruction Manual

Customer Helpline 0333 3201989
8
Operating Instructions
4. HAMMER OR DRILLING CHANGE (SEE FIG D)
When drilling masonry and concrete, choose the hammer position “ ”. When
drilling in wood, metal and plastic, choose the drill position. “ ”.
5. ON/OFF SWITCH
Depress the switch to start the tool and release it to stop your tool.
6. SWITCH LOCK-ON BUTTON (SEE FIG E)
Depress on/off switch then lock-on button, release on/off switch first and lock-on
button second. Your switch is now locked on for continuous use. To switch off your tool
just depress and release the on/off switch.
7. VARIABLE SPEED CONTROL
The on/off switch is also a variable speed switch that delivers higher speed and torque
with increased trigger pressure. Speed is controlled by the amount of switch trigger
depression.
B C
D E