Instruction Manual

Customer Helpline 0333 3201989
11
Technical Data
A weighted sound pressure L
pA
: 92 dB(A)
A weighted sound power L
wA
: 103 dB(A)
K
pA
& K
wA
= 3 dB(A)
Wear ear protection
Vibration total values (triax vector sum) determined according to EN 60745:
Impact drilling into concrete
Vibration emission value a
h
= 6.66 m/s
2
Uncertainty K =1.5m/s²
Drilling into metal
Vibration emission value a
h
= 2.62 m/s
2
Uncertainty K =1.5m/s²
Rated voltage 230 – 240 V ~ 50 Hz
Rated power 750 W
Rated no load speed 0-3000 /min
Impact rate 0- 48000 /min
Chuck capacity max 13 mm
Drilling capacity
Steel 13 mm
Masonry 16mm
Wood 30 mm
Protection class
/II
Weight 1.97 kg
The declared vibration total value may be used for comparing one tool with another, and
may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can
differ from the declared value depending on the ways in which the tool is used
dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
To use the correct accessory for the tool and ensure it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
Technical Data Table
Noise Information
Vibration Information