GUILD 750W Hammer Drill PDI750G Instruction Manual After Sales Support UK/Ireland 0333 3201989 Help@guildpowertools.co.uk Important - Please read these instructions fully before operating or maintaining your Guild hammer drill These instructions contain important information that will help you get the best from your Guild hammer drill, ensuring it remains safe to operate.
Contents Safety Information.....................................................................................................3 In The Box..................................................................................................................6 Accessories................................................................................................................6 Operating Instructions...............................................................................................
Safety Information Important - Please read these instructions fully before starting assembly Warning Symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the hammer drill. To reduce the risk of injury, Please read the instruction manual Warning Wear ear protection Wear eye protection Wear dust mask Double insulation Waste electrical products must not be disposed of with household waste.
Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery.
In The Box Parts 1 Keyless Chuck 2 Depth gauge 3 Drill/Impact action selector switch 4 Forward/reverse selector switch 5 Switch lock-on button 6 On/Off switch 7 Auxiliary handle 1 2 3 4 5 6 7 Accessories 6 Auxiliary handle Depth gauge Masonry drill bit(6mm) Customer Helpline 0333 3201989 1pc 1pc 1pc
Operating Instructions NOTE: NOTE: Before using the tool, read the instruction book carefully. Intended Use This tool is intended for impact drilling in brick, concrete and stone as well as for drilling in wood, metal and plastic. 1. AUXILIARY HANDLE (SEE FIG A1, A2) Slide the handle onto the drill and rotate to the desired working position. Make sure that the teeth on the grip fit in the protrusions on the handle collar.To clamp the auxiliary handle, rotate the handgrip clockwise.
Operating Instructions 4. HAMMER OR DRILLING CHANGE (SEE FIG D) When drilling masonry and concrete, choose the hammer position “ drilling in wood, metal and plastic, choose the drill position. “ ”. ”. When 5. ON/OFF SWITCH Depress the switch to start the tool and release it to stop your tool. 6. SWITCH LOCK-ON BUTTON (SEE FIG E) Depress on/off switch then lock-on button, release on/off switch first and lock-on button second. Your switch is now locked on for continuous use.
Operating Instructions 8. FORWARD AND REVERSE ROTATION CONTROL (SEE FIG F) To change the rotational direction, push the forward/reverse selector switch to the right position (as viewed from the front of the drill). The rotation will now be forward rotation. Push the forward/reverse selector switch to the left position. The rotation will be backward rotation. WARNING: Never change the direction of rotation when the tool is rotating, wait until it has stopped.
Working Hints For Your Hammer Drill 1. Drilling masonry and concrete Select the drill/impact action selector switch to the “hammer symbol” position. Tungsten carbide drill bits should always be used for drilling masonry, concrete etc with a high speed. 2. Drilling steel Select the drill/impact action selector switch to the “drill symbol” position. HSS drill bits should always be used for drilling steel with a lower speed. 3. Pilot holes When drilling a large hole in tough material (i.e.
Technical Data Technical Data Table Rated voltage 230 – 240 V ~ 50 Hz Rated power 750 W Rated no load speed 0-3000 /min Impact rate 0- 48000 /min Chuck capacity max 13 mm Drilling capacity Steel 13 mm Masonry 16mm Wood 30 mm Protection class /II Weight 1.
Technical Data Vibration Information And the tool is being used as intended by its design and these instructions. This tool may cause hand-arm vibration syndrome if its use is not adequately managed WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should also take account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle but not actually doing the job.
Guarantee This product is selected for DOMESTIC USE ONLY and not for business use. This product is guaranteed against manufacturing defects for a period of 24 months. This does not cover the product where the fault is due to misuse, abuse, use in contravention of the instructions, or where the product has been the subject of unauthorised modifications or alterations, or has been the subject of commercial use.
Plug Replacement (Uk & Ireland Only) If you need to replace the fitted plug then follow the instructions below. IMPORTANT The wires in the mains lead are colored in accordance with the following code: Blue – Neutral Brown – Live As the colors of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows. The wire which is coloured blue must be connected to the terminal which is marked with N.
