User's Manual

53
COM Port settings for external RTK GPS.
The Select accuracy for green option allows
the user to set the tolerance for the GPS
precision indicator that is displayed at the
top right of the monitor's screen while in
Started mode.
Use the High setting if utilising an RTK GPS.
Select the correct values for the COM Port
Baud Rate and CheckSum Validation to
match the external RTK GPS output.
A small external puck type GPS antenna can
be connected to the GX, select USB in the
settings to activate this option.
No GPS – low – medium - high
The GPS indicator will show the level of
accuracy from the GPS.
Note: The external RTK GPS antenna can be mounted on the GX antenna using the optional
bracket.