Assembly Instructions

Step 1 - At the preferred height, find two
studs in the wall and mark the locations
for the wall mount (H). For best results
use a level to make sure it is not at an
angle. Secure the wall mount (H) with
Hardware 3.
NOTE: If studs cannot be found purchase
"Hollow-Wall Anchor Bolts" to attach the
wall mount.
page 3 of 3
Guidecraft • 55509 Highway 19 West, Winthrop, MN 55396 • [phone] • www.guidecraft.com
Trophy Rack Instructions
ADULT ASSEMBLY IS NEEDED MOUNTING THE TROPHY RACK TO A WALL.
Wall
SIDE VIEW
Step 2 - Place the trophy rack on the
wall mount so that Part C nests into it.
Step 3 - Secure the trophy rack with
Hardware 3 through Part E into the
studs in the wall.
3
3
3
3
H
E