Quick Start Guide
Table Of Contents
- - IMPORTANT -
- - FCC WARNING -
- - NOTES -
- - LIST OF PARTS -
- - PRODUCT COMPONENTS -
- - QUICKSTART INSTRUCTIONS -
- 【BUTTON DESCRIPTION】
- 1. POWER BUTTON
- Power on
- Power off
- Display off
- Display on
- Compensation
- 2. BRIGHTNESS BUTTON
- Adjust screen brightness
- Focus far (some models)
- Switch to scene mode (some models)
- 3. COLOR PALETTES BUTTON
- Switch to color palettes
- Menu
- 4. ZOOM-IN BUTTON
- Zoom-in
- Focus near (some models)
- Hot track (some models)
- 【FUNCTION DESCRIPTION】
- 1. Video output
- 2. WiFi
- 3. Laser cursor
- 4. Image contrast (some models)
- NOTE: The adjusted contrast value will be saved in the current scene mode.
- 5. Image brightness (some models)
- NOTE: The adjusted brightness value will be saved in
- the current scene mode.
- 6. Hot track
- 7. Scene mode
- 8. Auto Stand-by
- 9. Automatic power-off
- 10. Bluetooth
- 11. Working indicator lamp
- - TROUBLESHOOTING -
- - STORAGE AND TRANSPORT -
7
1.
FOCUS RING
After the thermal imaging camera is turned on, it shall
be aimed at the target. When the distance between the
observation target changes, the image may be blurred.
Therefore, it is necessary to turn the lens focus ring to
refocus until the target image is clear.
2.
LENS COVER
Please cover the lens to protect the lens when the
product is not in use!
3.
USB Type-C port
The external port with USB cable can be connected to
the external power supply to charge the product.
The output of the external power supply is 5V2A.
The images from the thermal imaging camera can
also be output to the external monitor for display by
connecting the display with the supporting video cable.
4.
CELL COVER
When the cell of the product is used, it is the inlet for
disassembling and installing the cell.
Press the button on the cell cover and slide down and
open the cell cover, and install the cell according to the
anode and cathode marks.
NOTE: please insert the cell in the direction shown in
the figure, and do not push the cell forcibly.
5.
CAMBOX PORT
1/4-inch standard port, which can support pan/tilt.