Quick Start Guide

3
accessories to avoid damage.
6) Do not disassemble the unit by yourself, which may
cause damage to the device and loss of warranty
rights.
7) Do not use soluble or similar liquid on the device
and cables, which may cause damage to the
device.
8) Please do not use the device in an environment
with the temperature higher than the permitted
level, which may cause damage to the device;
9) Please observe the following rules when wiping
this device:
· Non-optical surface: if necessary, use a clean
and soft cloth to wipe the non-optical surface
of the thermal imaging camera.
· Optical surface: avoid soiling the optical surface
of the lens when using the thermal imaging
camera, and especially avoid touching the lens
with your hand, because the optical coating on
the glass surface may be corroded due to sweat
on the hands. When the optical lens surface is
contaminated, use a professional lens cloth to
carefully clean it.
10) Do not put the cell in a high temperature