Quick Start Guide
Table Of Contents
- - IMPORTANT -
- - FCC WARNING -
- - NOTES -
- - LIST OF PARTS -
- - PRODUCT COMPONENTS -
- - QUICKSTART INSTRUCTIONS -
- 【BUTTON DESCRIPTION】
- 1. POWER BUTTON
- Power on
- Power off
- Display off
- Display on
- Compensation
- 2. BRIGHTNESS BUTTON
- Adjust screen brightness
- Focus far (some models)
- Switch to scene mode (some models)
- 3. COLOR PALETTES BUTTON
- Switch to color palettes
- Menu
- 4. ZOOM-IN BUTTON
- Zoom-in
- Focus near (some models)
- Hot track (some models)
- 【FUNCTION DESCRIPTION】
- 1. Video output
- 2. WiFi
- 3. Laser cursor
- 4. Image contrast (some models)
- NOTE: The adjusted contrast value will be saved in the current scene mode.
- 5. Image brightness (some models)
- NOTE: The adjusted brightness value will be saved in
- the current scene mode.
- 6. Hot track
- 7. Scene mode
- 8. Auto Stand-by
- 9. Automatic power-off
- 10. Bluetooth
- 11. Working indicator lamp
- - TROUBLESHOOTING -
- - STORAGE AND TRANSPORT -
12
NOTE: The adjusted brightness value will be saved in
the current scene mode.
6. Hot track
A white cross cursor is displayed when it is turned on
to trace the highest temperature point in the full image.
7. Scene mode
Three scene modes, natural/enhanced/highlight, can
be set.
8. Auto Stand-by
The Auto Stand-by time can be set to 5/10/15 min. If
there is no operation within the set time, the sleep state
will be entered.
9. Automatic power-off
The automatic power-off time can be set to 15/30/60
minutes. If there is no button operation at the set time,
the power-off will be entered, and the power-off will be
completed.
10. Bluetooth
It can be set, and after it is turned on, the device can be
controlled by the Bluetooth remote controller.
11. Working indicator lamp
It can be turned on or off.